Kraftify™ Couple Hand Casting Kit - (Full Kit)

STEP-1 (MAKE A MOLD)
Keep everything ready, Prior to mixing the molding
powder, it is advisable to practice the desired pose
as you want to make a cast a couple of times using
an empty container. It is recommended to apply oil
to your hands before proceeding with the mixing
process of the molding powder.

To begin, start by pouring 2.5 liters of cold drinking
water into the bucket. Next, add the entire packet of
molding powder to the water and mix thoroughly
or
You can mix the powder and water in a (2.5: 1)
proportion, For Example
(For every 2.5 parts of water, use 1 part of powder)

Gently and smoothly mix the molding powder into cold water using the provided mixing tool. Ensure that the mixture is well blended and any lumps are broken up. Within 60 seconds of mixing, promptly
insert your hands into the mixture.
It's important to break up any small lumps, but
don't worry if there are some minor ones remaining.
The key is to avoid large lumps. Continuously tap
the container to eliminate any trapped air bubbles.

For improved and clear results, it is advisable to
apply oil to your hands. This will help facilitate
the casting process and ensure better outcomes.

Place your hand into the mixture immediately and
ensure it remains stable. It is important to note that
you should avoid touching the bottom or any walls
of the bucket while keeping your hand submerged.

Keep your hand stable for a period of 3 to 6
minutes, allowing the mixture to gradually harden.
After this time, gently wiggle your hand to allow
some air to get into the mold. Proceed to carefully
remove your hands from the hardened mixture in a
slow and controlled manner
Your mold is ready, please follow the instructions
provided in STEP-2 to continue the process.


STEP-2 (MAKE A CAST)
Set aside 20 grams of Casting Powder
separately. This reserved amount will be used for
any necessary repairs after the casting process,
if required,

In a bowl, thoroughly mix the entire packet of
Casting Powder with 360ml of normal
temperature water. Use a gentle and soft mixing
motion to ensure the powder is well-mixed.

Carefully and gently mix the Casting Powder into
the normal temperature water, ensuring a
smooth and controlled motion to prevent the
formation of air bubbles. Aim for consistency
similar to that of dosa batter—neither too thick
nor too thin.

Begin by filling the mold with the 25-30% of the
mixture. Then tilt the mold gently to ensure that
the mixture reaches every edge and corner.
Gradually pour the remaining mixture into the
mold, filling it up slowly. While doing so, tap and
vibrate the mold very gently using your hands.
This will help eliminate any air bubbles that may
be trapped within the mixture.

Allow the mixture to dry for a period of 4-5
hours. Once the drying time has elapsed,
carefully remove the rubbery mold from the
casting. Allow the cast to dry for an additional 30
minutes. After the drying period, you may
proceed with any necessary finishing work.

If you notice any particles or small imperfections
on the cast, there's no need to worry as this is a
normal occurrence. You can easily remove these
particles by gently using a given wooden stick.

Your cast is now finished. If you wish to color it,
it's recommended to wait for 2-3 days. After this
drying period, you can use the provided color and
a brush to paint the cast.

• Too thin or too thick a mix can cause lumpiness. If the mix is too thin, there isn't enough internal friction to work out the dry spots in the mix. If the mix is too thick, there isn't enough water to do the same. Careful measuring is critical.
• Use Cold water to increase the setting time of Molding mix. Cold water makes Molding Powder set slower. Please do not use warm water for mixing Molding powder, otherwise it will decrease setting time of mixture.
• Measure carefully, use good water and a good mixing technique and you'll be fine. We test our Molding Powder rigorously and we don't let bad product out of our warehouse.

1. What is a couple hand casting kit?
A couple hand casting kit is a DIY kit designed to capture the intricate details of a couple's hands clasped together in a durable and decorative sculpture. It typically includes all the materials and instructions needed to create a memorable keepsake.

2. What does the couple hand casting process involve?
The process involves mixing a molding compound, placing your hands in the compound, allowing it to set, and then pouring a casting material into the mold to create the final sculpture.

3. Is it safe to use?
Yes, our couple hand casting kits are made with non-toxic materials that are safe for skin contact. However, it's essential to follow the instructions carefully to ensure safety and proper usage.

4. How long does it take to complete the casting process?
The casting process typically takes around 30 minutes to an hour, including mixing the molding compound, making the mold, and pouring the casting material. However, the drying or setting time for the materials can vary, so it may take several hours for the sculpture to fully cure.

5. Can we customize our hand sculpture?
Yes, our kits allow for customization by offering options such as different finishes (e.g., metallic, marble), applying color to the casting, or including accessories like a display stand.

6. How durable is the final sculpture?
The durability of the final sculpture depends on the casting material used. Plaster of Paris casts may be more prone to chipping or breaking than those made with casting stone powder. Casts made up from our casting material are more sturdy and durable than casts from Plaster of Paris. When handled with care, our casts can last for years as a cherished keepsake.

7. Can we cast other body parts besides hands?
While couple hand casting kits are specifically designed for capturing hand molds, there are kits available for casting other body parts such as faces, torsos, or even entire bodies. However, these may require more advanced techniques and additional materials.

8. Are there any special considerations for successful casting?
It's essential to ensure that both participants are comfortable and follow the instructions closely to achieve the best results. This includes properly mixing the molding compound, keeping hands steady during the casting process, and allowing enough time for the materials to set and cure.

9. Can we redo the casting if we make a mistake?
It's always a good idea to read the kit's instructions carefully and practice with testing kits first if possible before attempting the final casting.